How To Install Morning Star Click Bamboo Flooring

Morning Star click bamboo flooring is a type of flooring that is made from bamboo and is designed to be easy to install. It is installed using a “click” system, which allows the individual planks to be easily snapped together without the need for nails or glue. If you are considering installing Morning Star click bamboo flooring in your home, here is a step-by-step guide to help you get started:

Prep the floor: The first step in installing Morning Star click bamboo flooring is to prepare the floor. This includes removing any existing flooring, cleaning the surface, and making any necessary repairs. The floor should be level, smooth, and free of debris before proceeding.

Lay the underlayment: Once the floor is prepared, you will need to install an underlayment. This is a thin layer of material that is placed over the floor to provide a smooth and even surface for the bamboo flooring to be installed on. The underlayment should be cut to fit the dimensions of the room and be rolled out in a continuous sheet.

Start at the corner: Once the underlayment is installed, you can begin installing the bamboo flooring. It is recommended to start at a corner of the room and work your way outwards. Begin by laying the first plank with the groove side facing the wall, and use a rubber mallet to gently tap the end of the plank until it clicks into place.

Continue laying the planks: Once the first plank is in place, continue laying the rest of the planks in the same manner, making sure to leave a small expansion gap around the perimeter of the room. Use a pull bar to gently tap the planks into place, and use a tapping block to protect the edges of the planks from damage.

Install the trim: Once all of the planks are in place, you can install the trim around the perimeter of the room. This includes the baseboards and any transition strips that may be necessary. Use a nail gun or wood glue to secure the trim in place, and fill any nail holes or gaps with wood filler.